DC Plasma Generator
- product ID:82
DC 1000W Plasma Generator
Specification:
DC 1000W Plasma Generator
Specification
1 Function
Plasma DC constant power, constant current and constant voltage power unit.
2 Operation method
SWITCHING MODE PWM. Control method.
3 Indication
Indicates power, current and voltage with the 20 x 4 LCD display.
4 Error in display part
0.2%± 1DIGIT
5 Sampling speed
About 2.0 time/sec
6 Stability level of output part
Within CURRENT±0.5%, VOLTAGE±0.5% and PPOWER±1.0%
7 Setup volume
VR1=10-turn precision V.R /OUTPUT LEVEL CTR
VR2=10-turn precision semi-fixed V.R /MAX CURRENT LIMIT SET
VR3=Option (10-turn precision V.R)/MAX CURRENT LIMIT SET
8 SOFT START
3SEC ± 10%
9 CONNECTOR
Output part, UHF Female (SO-239) or Terminal Block for RG213/U cable,and order specifications
REMOTE part, D-SUB-15 PIN
10 Remote function
OUT PUT ON/OFF
METER SIGNAL
-VOLT: -1000V/ 5V
-CURRENT:
-2.000A/ 5V -WATT: 1000W/ 5V
LEVEL CONTROL BIAS, Vref: 10V
Output adjusting input voltage: 0~10V
11 Max output
1000W (however, 500V,
2A Z=250Ω resistor load) Max output voltage
Max output current
SHORT CURRENT
Protection function
In no load; 1000V± 10V
-2A,(variable with 0A~100% semi-fixed V.R) -2A ARC current =
-4A, SHORT=20Ω or less, OPEN=10KΩ or less detected 12 Voltage available
AC 210~220V/ 50~60Hz
5 A, Single phase 13 Temperature feature
10~
40°C 14 Temperature available
0~
45°C 15 Preservation temperature
-10°C~ 75°C 16 Size
W482.6 × H88.9 × D
508mm (19inch 2U RACK CASE) 16 Weight
15 kg 18 Cooling
Forced air cooling method by a cooling fan.
19 Power cable
Standard
1.8M and order specifications 20 Interface cable
Standard
2.5M and order specifications User Manual (Click me for more information)